Quantcast
Channel: Hikvision
Viewing all 3423 articles
Browse latest View live
↧

My Hikvision cameras keep reverting to a low bitrate

January 8, 2020, 5:47 am
$
0
0
One of my cameras keeps reverting to 32 Kbps bitrate, which obviously results in a blocky image.

I know that there are 3 ways to configure cameras; on the NVR (and it's webpage), on the camera's webpage and on IVMS. The cameras were initially set up through the NVR, and then the settings have been tweaked through IVMS. For some reason though, even though none of the above have the bitrate set to 32 Kbps, it keeps reverting back.

Is there a way to see why the change is happening? I can't...

My Hikvision cameras keep reverting to a low bitrate
↧
Search

Setting up ANPR Camera

January 8, 2020, 6:38 am
$
0
0
Hey folks,

I've got a DeepinView camera, and wanted to know if this - How to set up Hikvision ANPR, is the most up to date setup instructions or if there is anything else?

I notice it says setup through NVR, are there any for setting up through a 4G router only?

Thanks
↧
↧

How to make Hikvision keypad silent?

January 8, 2020, 9:36 am
$
0
0
I have Hikvision DS-KD8003-IME1 with keypad DS-KD-KP. I have configured the system using iVMS-4200 but there is one thing which I haven't been able to solve. The keypad tone is somewhat annoying and I would like to disable it i.e. I would like to make the keypad silent. Any ideas how to do this?
↧

Thumbnail Images on Playback Timeline NO RESOURCE

January 8, 2020, 11:22 am
$
0
0
Hello

I have a DS7608/K2 8P running latest version 3 firmware connected to 4 x 2343GOs and 1 x 2365G1 camera running latest firmware also. Resolutions and frame rates set to max on all with bit rates enabled for highest settings. All works great, playback, live view, etc. except in playback on all cameras there are no thumbnail images showing on the timeline. Instead the thumbnails show "no resource".

I have tried to work out if its my settings but have not come across anything...

Thumbnail Images on Playback Timeline NO RESOURCE
↧

Wrong user name or password!

January 8, 2020, 12:29 pm
$
0
0
Hi,
I hope someone give me a clue on how to rectify the above? Just recently every time I try and log into my 6003 Wifi door bell I get the above message. I know the password is correct as I can log in via the SADP tool but I cant using the bell's IP address! I am using "admin" as user name.
↧
↧

Replaced broken camera now can't get good picture

January 8, 2020, 12:36 pm
$
0
0
Hi,

I have a Hikvision installed at home.
It's a DS-7204HGHI-F1 with three DS-2CE16C2T-VFIR3 cameras.
One of the cameras went bad and so the installer replaced it with a new one.
The new camera is a DS-2CE16D0T-VFIR3F.
Now I have 2 cameras with great image and the new one is a really bad image (the new camera).
I've called them several times and the final result is always the same. I personally think they don't know what they are doing. Also, they don't give me the admin password (they say...

Replaced broken camera now can't get good picture
↧

I Series NVR Update

January 8, 2020, 5:32 pm
$
0
0
Hello all

Just seen on the Hikvision portal that there is a new firmware update for the I series NVR that's been released today.

V4.22.005 Build 191208

HIKVISION UK PORTAL

www.hikvisioneurope.com www.hikvisioneurope.com
↧

Hikvision iVMS-4200 - can I hide the event markers?

January 8, 2020, 11:07 pm
$
0
0
Hide smart event area markers (in blue) is there any way so you don't see them??
Thanks
↧
Search

Hikvision Hik-Connect IOS App user manual V3.10.0

January 9, 2020, 3:18 am
$
0
0
Please find the latest Hik-Connect user manual attached for IOS, iPhone, iPad users
↧
↧

Hik-Connect: Playback speed

January 9, 2020, 3:57 am
$
0
0
Hi everyone,

In the last month, I took the plunge and bought a HikVision NVR (DS-7604NI-K1/4P) for home with four G1 Series IP camera's (2x 2355, a 2155 and a 2363). Cabled it all myself and I'm really happy with the results, worth every penny.

Thanks to this forum (megathread mainly), I have managed to get the VCA settings working (line crossing and intrusion detection) working with email alerts and also the IP camera firmware updated to the latest version.

I have also enabled the...

Hik-Connect: Playback speed
↧

ivms 4200 vs install, no live view on android, recordings ok

January 9, 2020, 7:17 am
$
0
0
have been using 4200 pcnvr for ages but wanted to update to somthing newer

have installed on my W10 server the lastest version of storage recorder and streamer

client installed on main pc and works fine for live view and config etc

but i cannot get the Android app to live view, was fine before on pcnvr software

can access recordings ok

any ideas?
↧

Hikvision door bell - wrong user name or password!

January 9, 2020, 7:29 am
$
0
0
Hi,
I hope someone give me a clue on how to rectify the above? Just recently every time I try and log into my 6003 Wifi door bell I get the above message. I know the password is correct as I can log in via the SADP tool but I cant using the bell's IP address! I am using "admin" as user name.
↧

How do I access my Hikvision 7608NI-E2 NVR from my mobile phone without port forwarding?

January 9, 2020, 7:49 am
↧
↧

Hikvision DS-7608NI-K2 / 8P Intrusion detection alerts have stopped

January 9, 2020, 9:51 am
$
0
0
Ok at a bit of a loss here, this has been working perfect for a while, now it isn't.

Basic checks

1) Email account? Sent test email to all 3 users in group. Works ok.
2) Check intrusion detection

Area Settings
Area 1 is Yellow



Settings
1
58
5

Arming Schedule all Blue

Linkage method
Send Email
Trigger Channel D1


I have also checked in Event logs nothing showing here when i jump around like a loonie in the zone of camera D1, any ideas here? Im loathed to...

Hikvision DS-7608NI-K2 / 8P Intrusion detection alerts have stopped
↧

How Much Bandwidth and Storage does Hikvision's H.265+ Save?

January 9, 2020, 4:38 pm
↧
Search

I cannot access my Hikvision system when I am away from home?

January 10, 2020, 2:42 am
$
0
0
Hello I have a hikvistion cctv systems I dont no alot about them or the set up

I am having a problem with viewing my camera while I am away from the wifi zone so through 4g it will not let me view live view or play back I getting a connection error and when I try do on connect I getting video playback failed error code 380356 but on the app it say connection fails I using ivms -4500 that where its say con fail I hik connect say the play back code above

I...

I cannot access my Hikvision system when I am away from home?
↧

What do you use to keep wires and connectors waterproof?

January 10, 2020, 2:46 am
$
0
0
I wish there was a way to remove the power cable from my hikvision cameras as I am going to only use POE.

What would you reccommend to protect the cables as the ethernet cable will need connecting to the camera at the connection point and there will be the spare power supply cable too that need protecting?

Thanks for your help.
↧
↧

Intercom problem

January 10, 2020, 2:52 pm
$
0
0
Prosím, dej mi radu. Mám interkom Hikvision DS-KH8300 s DS-KV8202. Stává se mi, že po vyzváněcím tónu je černá obrazovka fotoaparátu venkovní. Druhým vyzváněcím tónem je vše v pořádku. Víte, kde to něco způsobuje?

Kromě toho někdy, když stisknete tlačítko venkovní jednotky, nehraje venkovní jednotku vyzváněcího tónu.
Posledním problémem je, že někdy, když stisknu odpovědi na LCD, zvuk a obraz zamrznou a chvíli trvá, než mohu načíst video z venkovní jednotky.
Děkuji ti za tvou radu.
↧

NVR4.0 AccessController IoT linkage - Arming failed?

January 10, 2020, 6:32 pm
$
0
0
Hi everyone,

I'm trying to link an NVR (DS-7732NI-K4 on V4) with a DS-K2602 Access Controller via IoT.
The feature of overlaying Card numbers and access events on the video footage will be extremely handy for us. But i'm hitting a wall and have been banging my head for 4 hours now.

DS-7732NI-K4 Just upgraded to V4.21.5 build 190509
DS-K2602 Access Controller on V2.05 build 190301

Chrome does NOT show the IOT Channel Settings for some reason? It's only visible in Internet Explorer.
In...

NVR4.0 <-> AccessController IoT linkage - Arming failed?
↧

IVMS 4200 permanently minimized

January 11, 2020, 6:00 am
$
0
0
Hello.
Following a routine Windows 10 update, my IVMS 4200 CCTV images are all permanently minimized. That is, there is a single icon on the bottom bar on the screen. The maximize and restore options are all greyed. Any suggestions gratefully received.
↧
Viewing all 3423 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>