Quantcast
Channel: Hikvision
Viewing all 3423 articles
Browse latest View live
↧

DS-7716NI-I4 problem since upgrade to NVR.4.... i think or maybe the change of ISP

January 6, 2020, 4:08 pm
$
0
0
Hi

I'm having issues with my DS-7716NI-I4.

My Platform Access/Register Status is showing as Offline and I cant get it to change to Online no matter what I try.
I have spent five hours today going over the settings, I'm missing something silly I think.

to make things worse I'm not sure if it has been a problem since the NVR upgraded to NVR.4 or when I changed ISP to SKY from BT.

Any help appreciated
↧
Search

[Tutorial] Recording to an SD card on a Hikvision camera.

January 6, 2020, 11:40 pm
$
0
0
In this tutorial I will show you how you can record and playback surveillance footage straight to an on-board SD card.

In order to follow this tutorial you should be prepared with a hikvision camera which has an on-board SD card slot. The camera i'll be using will be the DS-2CD2432F-IW. you should also have an SD card with sufficient storage space. I would recommend at the very least 32GB, however I...

[Tutorial] Recording to an SD card on a Hikvision camera.
↧
↧

Hik-Vision connects via mobile app but not via Web Browser?

January 7, 2020, 1:20 am
$
0
0
Hi,

Don't know if this is a simple fix, but I am able to connect remotely to my NVR using the Hik-Vision app. However, when I use a web browser to connect to the NVR, I can successfully log into my account, but when I click the IP address it will not load.

Does anyone know how I fix this? ? A firewall issue?
↧

Alternative mounts for video intercom screens?

January 7, 2020, 3:12 am
$
0
0
I'm looking to install a DS-KH8520-WTE1 10in indoor station inside an open-front kitchen cabinet, approx 12 inches from the wall so that the screen is flush with the front of the cabinet - either in a fixed position or on an adjustable mounting arm. A VESA-type TV mounting arm would do the trick but I don't think the Hikvision screens are VESA-compatible. Any suggestions?

There are some iPad under-cabinet mounting arms around such as...

Alternative mounts for video intercom screens?
↧

Hikvision DS-7604NI-E1 Camera Access

January 7, 2020, 3:33 am
$
0
0
Hi, I currently have a couple of Cameras connected to DS-7604NI-E1 and the cameras were using night vision at night, recently they have turned to colour only and I cant seem to find a setting anywhere which can set DAY/Night mode..?
Any Ideas?
I also tried setting Virtual host but it looks like this isnt supported on this NVR?
Any help will be appreciated.
Thanks
↧
↧

Hikvision iVMS-4200 - can I hide the event markers?

January 7, 2020, 4:01 am
$
0
0
Hide smart event area markers (in blue) is there any way so you don't see them??
Thanks
↧

Hik-Connect: Playback speed

January 7, 2020, 6:41 am
$
0
0
Hi everyone,

In the last month, I took the plunge and bought a HikVision NVR (DS-7604NI-K1/4P) for home with four G1 Series IP camera's (2x 2355, a 2155 and a 2363). Cabled it all myself and I'm really happy with the results, worth every penny.

Thanks to this forum (megathread mainly), I have managed to get the VCA settings working (line crossing and intrusion detection) working with email alerts and also the IP camera firmware updated to the latest version.

I have also enabled the...

Hik-Connect: Playback speed
↧

Using a People Counting Camera with an NVR

January 7, 2020, 7:03 am
$
0
0
Hi

New to this forum as HikVision UK support refuse to help me as I'm not a trade customer. I'm hoping someone here can help.

We have an NVR model: ds-7732ni-14/16p and a people counting camera model iDS-2CD6810F/C. I have checked and both are running latest firmware.

The camera plugs straight into the NVR and auto-sets up. I can log into the NVR through the website and watch the camera fine. In order to calibrate the line and settings for counting though I am aware I need to use the web...

Using a People Counting Camera with an NVR
↧
Search

Problems Running iVMS-4200 on MacOS Catalina(10.15)

January 7, 2020, 7:21 am
$
0
0
We have had several customers and forum users reporting problems running iVMS-4200 since updating to MacOS Catalina (10.15), the reports have varied from some saying the software runs ok but does crash unexpectedly to others saying the iVMS software does not work at all.

If you have G1 cameras (2xx3G0/2xx5FWD/2xx5G1) and/or an I-series NVR you can get around the iVMS issues by updating to the latest firmware and logging in to the NVR/cameras with any browser using the 'plug-in free'...

Problems Running iVMS-4200 on MacOS Catalina(10.15)
↧
↧

Hik Smart Tracking

January 7, 2020, 10:08 am
$
0
0
Hi,
I have an analogue DS-2AF7264-A and it would happily sit and follow blowing branches, leaves etc.

However a week ago I as having a play with it and changed some settings and now it has ceased to follow movement. (obviously smart tracking is still on)

So my question is, before I do a factory reset and set it up again, can anyone think off the top of their head, which setting is likely to interfere with tracking?

Fingers crossed.
Gordon.
↧

Hikvision DS-7608NI-K2 / 8P Intrusion detection alerts have stopped

January 7, 2020, 1:41 pm
$
0
0
Ok at a bit of a loss here, this has been working perfect for a while, now it isn't.

Basic checks

1) Email account? Sent test email to all 3 users in group. Works ok.
2) Check intrusion detection

Area Settings
Area 1 is Yellow



Settings
1
58
5

Arming Schedule all Blue

Linkage method
Send Email
Trigger Channel D1


I have also checked in Event logs nothing showing here when i jump around like a loonie in the zone of camera D1, any ideas here? Im loathed to...

Hikvision DS-7608NI-K2 / 8P Intrusion detection alerts have stopped
↧

Hikvision hard drive woes

January 8, 2020, 4:32 am
$
0
0
Been having some issues with my Hikvision DS-7604NI-K1/4P NVR

First, my hard drive stopped working (displaying not exist), its been rock solid for around a year, so I tested it in my pc and all seemed well.
In the end, I bought a new replacement HDD just to eliminate that, still didnt work with the new unit in.
it sounds like it's not spinning up properly, so I tested the power supply into the HDD, steady 5v and 0.7a - which according to my limited experience should be ok.
I have now got...

Hikvision hard drive woes
↧

IVMS 4200 permanently minimized

January 8, 2020, 4:39 am
$
0
0
Hello.
Following a routine Windows 10 update, my IVMS 4200 CCTV images are all permanently minimized. That is, there is a single icon on the bottom bar on the screen. The maximize and restore options are all greyed. Any suggestions gratefully received.
↧
↧

Hikvision 2121G0 camera not recording to microSD memory card

January 8, 2020, 4:45 am
$
0
0
Hi, I have a Hikvision Network camera that is able to save recordings into the SD card but I am unable to view the recordings in the playback tab when using a web browser. I have to manually take out the SD card from the CCTV and read it on my laptop to confirm that the recordings are being saved. I am unable to locate any of the recorded videos. Is there any way to solve this issue? Note, I do not use a NVR.


1578382720237.png

[ATTACH type="full"...

Hikvision 2121G0 camera not recording to microSD memory card
↧

Smart Track AND Patrol

January 8, 2020, 4:47 am
$
0
0
Just curious if it’s possible to enable smart tracking and patrols at the same time? I have both enabled, and the smart tracking doesn’t seem to work anymore after enabling patrols. Maybe just something I’m missing so I figured you guys would know best. TIA
↧
Search

Number of images with alerts

January 8, 2020, 4:52 am
$
0
0
What are the standard number of images emailed with alerts. My line detection and intrusion have different numbers of image attached to email alert (1or 3). Some cameras seem to have different number of images attached to similar events.

I did read a post here before about it but can’t find it with the search function! Think there was a change when firmware changed
↧

Hikvision DS-7224HQHI-K2 DVR - Cameras not showing?

January 8, 2020, 4:53 am
↧
↧

DS-7608NI-K2/8P - adding IP camera using POE switch - need firmware update and how?

January 8, 2020, 5:09 am
$
0
0
I connect 5 IP camera (each IP cam with manual defined ip adress, user, password etc) to a hickvision POE switch on a building
Now the NVR DS-7608NI-K2/8P is set on a different building where the internet router is.
My wish is to add those 5 IP cameras to the NVR:
1. when i setup and connect the switch to LAN router where NVR is also connected (changing IP to be in same class etc) - i can acces each camera, the NVR see all 5 cameras on the add list but can't add, it say "IP limit reached"...

DS-7608NI-K2/8P - adding IP camera using POE switch - need firmware update and how?
↧

Not getting notifications from new camera

January 8, 2020, 5:11 am
$
0
0
I am having trouble getting notifications from my new ColorVu camera, I already get emails from my older turret for line crossing and from the doorbell when it is activated.
My system is all Hikvision, the NVR is a DS-7604NI-K1/4P(B) with two cameras connected by WiFi, the DS-KB6403-WIP doorbell and DS-2CD2435FWD-IW Cube for keeping an eye on the dog. The two turrets in the back garden are hard wired back to the NVR, the older DS-2CD2385FWD-I mounted on the fence faces the gate and is set to...

Not getting notifications from new camera
↧

HikVision NVR Crashing

January 8, 2020, 5:29 am
$
0
0
I have a new HikVision 6 Cam system that works well for about 8 hours, then the NVR crashes loosing all video streams.
A hard reboot (unplug/replug) usually brings everything back on line. The Kit is Model EK1-Q82T46 and the NVR is ERI-Q108-P8, purchased in September in USA. The NVR Firmware is V3.4.96Build180324 and when I try an on-screen update, it tells me that there is no Firmware update available.
The system looses video to a direct attached TV, to the iVMS-4200 software and...

HikVision NVR Crashing
↧
Viewing all 3423 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>