Quantcast
Channel: Hikvision
Viewing all 3423 articles
Browse latest View live

hik-connect and DS-KB8112-IM

$
0
0
Hi.
I can`t find where is the problem with hik-connect and my DS-KB8112-IM. In hik-connect it always is in offline mode (it also was very difficult to add it to device list - after trying a lot off times). After restarting kb8112-im it goes on online only few seconds and again is in offline mode. If i use a web browser or ivms-4200, my ds-kb8112-im works fine. I can see video, hear the voice over ds-kh8301-WT also.

So, anybody knows why kb8112 is always in offline mode in hik-connect? When...

hik-connect and DS-KB8112-IM

Can I add my 16-channel DVR to a 16-channel NVR?

$
0
0
Hi i’m new to this forum
I’m trying to ad an 16 channel hikvision dvr to a hikvision poe nvr to view analog channels of my dvr on the nvr
I apreciate your help

Night mode but not B/W

$
0
0
Hello there,

I have 2 cameras DS-2CD2385G1-I 8MP and one 7604NI-K1/4P(B).

I am super happy with them but don´t like B/W mode so I wanted to buy any ColorVu to try colour mode at night BUT first I have tried disabling IR and just with Day mode at Night and with a few settings to the exposure and here and there I think I can get same if not almost identical results to Colorvu at night because I have some street lightning at night enough to help to the Darkfighter. I don´t have any Colorvu...

Night mode but not B/W

iVMS-4200 VS Smart Event alarm/record indication

$
0
0
Hi Everybody,

I'm enjoying getting to learn the ropes around the latest version of iVMS-4200 VS (v1.1.0.10), it's certainly quite different from iVMS-4200 v2

One idiosyncrasy that I have noticed is that the red bell icon that appears in the Main View when detected Events are sent from cameras does not turn off after Smart Events (Line Crossing Detection, Intrusion Detection, etc.) have ended. In fact, the only way I can clear this indication is to re-start the software.

Cameras with Basic...

iVMS-4200 VS Smart Event alarm/record indication

Hikvision 2nd Gen Video Intercom - is it broken?

$
0
0
Just installed and it's either broken or not fit for purpose imho - but what do you think? The linked clip from my new Hikvision DS-KD8003-IME1 Door Station was taken at native 1080p resolution from a live view in iVMS-4200 (it looks the same in other viewers). I realise that artifacts appear in night footage but this, according to the experienced Hikvision installer, looks like a swarm of swirling dust particles trapped inside the sealed unit. Separately the pixels are jumping around every...

Hikvision 2nd Gen Video Intercom - is it broken?

Hikvision PTZ smart tracking duration settings - help please

$
0
0
Hello everyone
We have a camera DS-2DF7286 with smart tracking. It works ok but does not track for long enough. If someone walks down the street it will track them for about 5 seconds then moves back to home position instead of taking notice of what the person is doing. I cant seem to find any settings on how long it tracks for. Could someone please point me in the right direction.

Please update your firmware to the latest available version

$
0
0
I'm making this plea again, because every day we continue to get calls and enquiries about "odd" issues, features "not working", cameras "gone faulty", cameras that have "gone offline", no longer being able to see video in my App, on my Mac, in IVMS-4200, in my browser, etc.
95% of those callers own HikVision systems.
50% of those callers are what you might term disbelieving when told they need to update their firmware.
Especially if it's a young female member of my team that gives...

Please update your firmware to the latest available version

DS-KB6003-WIP door bell keeps going off line

$
0
0
I have the above door bell connected to my home WIFI mesh network setup, its a BT HH6 meshed to 3 Devolo Powerline 1200AC WIFI nodes (both 2.4 &5 Ghz channels are set to auto). The signal is very strong all around the house including at the door bell. I had the door bell working faultlessly for months and then it suddenly went off line and only a reset could get back online. The bell has not worked properly for the last few months, after a reset is could work for days or hours before going...

DS-KB6003-WIP door bell keeps going off line

Changed internet service Plus camera problems

$
0
0
Hi This is my first post on here so here goes. December i changed the internet to superfast 140MBPS on the IVMS 4200 service platform and had worked resonably well prior to the new broadband service. The cameras had obviously not been set up properly as even on live view at the NVR i had sparodic time lapse the time was not sync'ed and was way out. The lead time pre event was not correct, all things at the time i put up with. The two lads that installed it for me no longer trade but i did...

Changed internet service Plus camera problems

HikVision Camera Web page issues

$
0
0
I've managed to solve one issue with my camera but now have another issue. I have 2 identical cameras and have updated them to the same firmware using the same firmware file. When viewing the camera directly via its IP address in my web browser (Google Chrome running on Windows 10 Home), I get a difference in the webpage and a different set of functions.
The first camera I set up (a few weeks ago now) is this page and I've highlighted the differences on this image:
[ATTACH...

HikVision Camera Web page issues

Apple Safari 12 and Hikvision cameras

$
0
0
Apple have just released an update to their Safari browser - V12.0

First reports are coming in that with this version of Safari it is no longer possible to view Live Video from your Hikvision cameras.

The latest version of the Mac plugin currently available is V3.0.6.23 (on that landing page click Downloads at the left side; this version is dated Feb 12th 2018) - this is the latest version of the plugin we can find...

Apple Safari 12 and Hikvision cameras

HDD Not Exist

$
0
0
Hi,

I have a Hikvision NVR with a Seagate 2TB hard drive (Green). I've had this for two years without any issue. However, yesterday I had two power cuts and since then the NVR isn't recording as the HDD is seen as Not Exist. I have tried to format it but it doesn't do anything.

I try to connect this HDD to the laptop although it recognises it, I can't not see the drive for it.

DVR DS-7332HWI-SH errors

$
0
0
Hello,

I have a "traditional" DVR type: DS-7332HWI-SH.

DVR is remotely accessed by application iVMS-4200 (v3.1.1.13) installed on computer (OS: Windows10Prof.64bit).

When the computer is restarted and iVMS-4200 is opened, I cannot access, for a time, the cameras of DS-7332; error code: iVMS-4200 Video.C.exe [1602]; “Camera is disabled or not connected”.

In Device Management (iVMS-4200), the DVR appear offline; when I try to Edit the device (button), I receive a...

DVR DS-7332HWI-SH errors

Hikvision DS-KB6003-WIP doorbell notifications glitch

$
0
0
Hi,

I have a Hikvision DS-KB6003-WIP video doorbell, with a 128gb SanDisk memory card installed and which is also connected to my Hikvision Turbo DVR via it's IP address.

One of the features of this doorbell is a notification system via the Hik-Connect iphone app. Every time somebody stands in front of the door, i receive a notification. There are adjustable motion detection settings and you get a thumbnail and short video for each event.

doorbell.jpg
...

Hikvision DS-KB6003-WIP doorbell notifications glitch

NVR DS-7604NI-K1-4P(B) rebooting same time every night

$
0
0
For some reason, and I just cannot figure it out, my new DS-7604NI-K1-4P(B) reboots itself nearly the same time every night.

See the last 2 days alert I receive by email:

Code:
EVENT TYPE:    Video Signal Lost
EVENT TIME:    2019-01-29, 03:08:15
NVR NAME:      Network Video Recorder
CAMERA NAME(NUM):   Front(D1)  Back(D2)  Garden(D3)  Side(D4)
Code:
EVENT TYPE:    Video Signal Lost
EVENT TIME:    2019-01-28, 03:06:52
NVR NAME:      Network Video Recorder
CAMERA NAME(NUM)...
NVR DS-7604NI-K1-4P(B) rebooting same time every night

Upgrading new firmware failed on Hikvision DVR

$
0
0
Hi all,
I am new here .I was trying to update the latest firmware for this Hikvision DVR model DS-7208HUHI-K2/P..
atm I have the Current Version V4.20.000 build 181107..
The reason i try to update it was ,i cannot see camera live view when I use web browser IE
I install the LocalServiceComponents. but it was not successful, only I can view live when I use IP Acusensce camera, when I sign to this camera of ip address
I though the problem was a old firmware, so I decided to upgrade using...

Upgrading new firmware failed on Hikvision DVR

iVMS-4200 expert here? / How to Access a Device?

$
0
0
Hi
I cant tell with Hikvision I use its confidential. I ordered them via a Special Company so pls dont ask further Question about.
I fight with Hikvision the want me to buy there Pc with there Software on who is not neccecary because the Software run on any PC if the sell there HW Dongle...
So I looking a way around with legal stuff. I found the iVMS-4200. Does anyone here use that?

My Device have a Web Server running on Port 80 and 443 but show a 404 when I try to access them. Is there a...

iVMS-4200 expert here? / How to Access a Device?

The latest version of Hikvision's iVMS-4200 software for Windows v3.1.1.6 - 22nd July 2019

Unable to make changes to HIKVISION DS-7208HQHI-K1

$
0
0
Hi all.

Having similar issues as Stani Emerson John seems to have had in this Thread.

Model : DS-7208HQHI-K1
FirmWare Version : V4.20.000 build 181129
Cameras : 4 x Analogue

The system is working has been working fine since I got it and set it up.

However I now want to add another analogue camera, however on the cameras page although i could select the button from IP to...

Unable to make changes to HIKVISION DS-7208HQHI-K1

Latest HikVision Firmware for K-Series [76NI-K1(B)] NVRs - V3.4.109

Viewing all 3423 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>