Hi all,
I updated the firmware on my NVR to FW 3.4.92 and all my static camera's to FW 5.5.0
All went well and everything is back up and running bar one issue.
Due to location I have 4 camera's attached via a POE network switch. I patched in their IP address into the NVR and they work perfectly fine.
The problem is I have one camera that plugs directly into the NVR. That one no longer works and I have narrowed the problem down to a POE issue. The camera itself is fine as I have tested...
Hikvision DS-7608NI-E2 / 8P - POE Dead ?
I updated the firmware on my NVR to FW 3.4.92 and all my static camera's to FW 5.5.0
All went well and everything is back up and running bar one issue.
Due to location I have 4 camera's attached via a POE network switch. I patched in their IP address into the NVR and they work perfectly fine.
The problem is I have one camera that plugs directly into the NVR. That one no longer works and I have narrowed the problem down to a POE issue. The camera itself is fine as I have tested...
Hikvision DS-7608NI-E2 / 8P - POE Dead ?