IP Address
I have been having problems when trying to view my CCTV images when I am away from home. It turns out that I need to use the IP address as issued by my Broadband supplier and so I substituted the one...
View ArticleClik here to view.
Pre-Record + Post-Record Settings Not Working
DS-7608NI-I2 V4.1.64 Build 190119 Recording Schedule set to Motion Record 24/7 Advanced Settings: Pre-Record 10s Post-Record 10s Recorded Activations are only showing the motion event and no pre or...
View ArticlePTZ Camera Added to NVR but only letting my see its secondary stream settings
Hi I have 2 Cameras linked to my NVR via a Wireless bridge I have added them Via the Web GUI but for some reason they treat the main feed as the sub feed thus having lower resolution and bit rate.
View ArticleDS-7716NXI-I4/4S NVR (Pro-Series/EasyIP-4.0, Acu Sence)
First off all I want to say Hi to all use-ip community. I have on my hands an Easy Ip 4.0 Series AcuSence NVR. I am trying to test its capabilities with 2 simple (no AcuSence) ip cams. First cam is a...
View ArticleDoes the NVR need a fan?
Just looking inside the Hikvision 7604NI and there is no fan. There is room for one. Are they needed? Any complaints of overheating on these units with POE? Just wondering if I need a fan or not. Many...
View ArticleHow to reset the password of an EZVIZ account
How to Reset the Password of an EZVIZ Account We've had a few customers and forum user enquiries over the last couple of weeks regarding how to change or reset the password of an EZVIZ account. The...
View ArticleHik-Connect 5 mins behind
Hello, Hik-connect app is streaming live view which is 5mins behind real-time. Is there any way to make this closer to real-time?
View ArticlePlanned upgrade + confusion with 'old' camera firmware (DS-2CD2432F-IW)
Hi beautiful people, After 'tidying up' all the rest of my infrastructure at home I am looking at upgrading the cameras in the flat while reusing the current cameras - if possible - in the basement....
View ArticleNew I series NVR firmware - 4.21.008
There is a new version of the firmware for the I series NVRs on the EU portal Verion 4.21.008 There is also a folder called release notes but in true Hikvision style they haven't put any release notes...
View ArticleHim connect cam offline
The Hikvision app shows one of my ip cameras as offline. ( this was due to a faulty cable now fixed ) the camera is back working however the app still shows it offline. I can’t seem to refresh the app....
View ArticleNAS - files saved into first folder only!
I use 4 x G1 Series cameras (minidomes and cube) that save data to NAS. All used to work fine but after upgrading to firmware V5.5.83 I noticed all video files are saved into one folder only. All other...
View ArticleNVR and Wireless bridge
hi, I’ve used the search tool but haven’t found any threads with exact set up but did find one post which confirms my belief that the plan should work. AJAY said: Are you installing a single Nanobeam...
View ArticleInterrupting a PTZ preset
Hi guys I have a few presets that are setup on a schedule to run 24/7. Essentially, point left, point right, point down, return to sequence start. on about a 15 second delay for each stage. When I take...
View ArticleHik-connect cam offline
The Hikvision app shows one of my ip cameras as offline. ( this was due to a faulty cable now fixed ) the camera is back working however the app still shows it offline. I can’t seem to refresh the app....
View ArticleHikvision Recordings
Hi Guys, We have a failed NVR and we need to retrieve the footage from a previous date for police review. Can I put this into a replacement NVR and be able to play these back? Thanks
View ArticleClik here to view.
NVR i Firmware V4.22.000 Build 190821
Just noticed that Hikvision have released the firmware for I series HIKVISION UK PORTAL www.hikvisioneurope.com
View ArticleHim connect says offline after changing broadband supplier
Recently had some Hikvision cctv fitted i have changed broadband to talk talk now it says offline in all 4 boxes where cameras should be can anyone help to solve this please
View ArticleLocal LAN IP address when connected to NVR?
Hello Is it possible to set cameras to have a local IP address when connected to the NVRs POE ports please? I am guessing not and I will need to keep using my Netgear switch plugged into the NVR?...
View ArticleNew Intercom 2nd Generation + NVR POE 7608ni/k2
Hi everybody, i recently buy the new intercom module from hikvision. But i got a problem, once the nvr start i can work with intercom 2 minutes max and after, all screen reboot and ime 8003 is...
View ArticleHikvision questions
Hello all, I’m looking for a 4 camera setup and has a few questions. - can I use the 8mp easyIP 3.0 cameras with a acuvu nvr to get those features or are they only for easyIP 4 cameras? - does anyone...
View Article