Hikvision 4200 goes offline on its own.
Hikvison 4200 goes offline after a few hours ... or when nobody is watching remotely? The unit is unattended 20 Km away. Why does it go off line on its own? How can I reconnect it remotely?
View ArticleDarkfighter DS-2DE2A404IW-DE3
Hi, i have the DS-2DE2A404IW-DE3 and Hikvision state it is a Darkfighter, the firmware is on V5.6.14 build 190826, but in comparison to both my DS-2CD2165G0-I cams that are also Darkfighter it seems...
View ArticleHikvison sub camera stream
I’m untiling a Hikvision DS-2CD2143G0-1 camera to provide a video feed to my gogogate2 product. Currently this url: http://[IPAddress]/streaming/channels/102/picture provides a video feed, however it’s...
View ArticleDVR Model No: DS-7604NI-K1-4P offline
Recently the Hik-Connect app stopped working after a power cut. After several attempts to ’fix’ this I reset the DVR to factory defaults and tried a new install. I noticed that the DVR Platform Access...
View ArticleConfiguration Audion/Video, change on camera or NVR
There are fairly similar configuration pages on the NVR and Camera for the above and I am trying to work out which I should be using. There is no audio tab on the NVR so I tend to change the...
View ArticleIssue with one camera remote viewing
Hi all, Please excuse my newbie question but I have been tearing my hair out trying to resolve an issue for days.... I bought and installed two HIK EXIR Turret Cameras (DS-2CD2385FWD-I). They were...
View ArticleDo IP PTZ's need extra power
Evening all, new member on here so hopefully can get some good info and give some out Just wanted to find out for IP systems mainly HIK, do the PTZ (mainly DE range) need extra power, like 24 ac or...
View ArticleNVR Model No: DS-7604NI-K1-4P offline
Recently the Hik-Connect app stopped working after a power cut. After several attempts to ’fix’ this I reset the DVR to factory defaults and tried a new install. I noticed that the DVR Platform Access...
View ArticleHikvision's latest Hik-Connect App updates
Hikvision’s Hik-Connect mobile app has been a significant topic for discussion in recent weeks. We’ve noticed that people have been asking things like “why can’t I access the latest update for Version...
View ArticleMotion Detection, do I set via camera or NVR interface.
From what I can gather I set storage in NVR (to say when I want to record) but the NVR seems to have reduced functionality of motion (i.e. no-expert). Can I set storage/motion in NVR and set the expert...
View ArticleClik here to view.
Remote Backup not working to network drive
Works fine to local disk but if I set it to a network drive I get The network drive has full read/write access. Ben
View ArticleLatest HikVision Firmware for I-Series NVRs - V4.22.005
Hikvision have released new firmware for their I-Series Network Video Recorders. The latest firmware, Version 4.22.005, can be downloaded here. NB - you may need to refresh your browser when viewing...
View ArticleSome "basic" questions about accessing IP camera direct or via NVR
Morning all, I have an NVR (108MH-C/8P) and am setting up a PoE dome camera (IPC-D140H-M). The image is inverted and I've read all I can about the camera setting to flip the image. I have the web based...
View ArticleHikvision KD8003 video intercom and SIP
Trying to get the KD8003 working with SIP to a grandstream system. Sip is all configured, registers fine and rings the phones, however when you answer the phone the intercom hangs up. Has anyone else...
View ArticleProblem with password on HiLook
I'm having a few problems with my new HiLook DVR. All my cameras are Hikvision by the way. Anyway, I went to go into the menu but was presented with nine circles which I had to make a shape. I vaguely...
View ArticleHikvision Password Reset - Do It Yourself
Firstly, your device will need to be running recent / the latest available firmware. We have only yesterday seen the first reference to this feature in the brief notes to the latest firmware for the -I...
View ArticleOver-long Intrusion pre-record [DS-2CD2543G0-IS]
I'm trying to figure out why my DS-2CD2543G0-IS records more Intrusion footage to my SD card than I specify. I set pre-record to 5secs with a post-record of 10secs but I get over two minutes of static...
View ArticleBNC cable
Hi I’m a bit of a novice to this cctv fitting , i have fitted a Hikvision set up with 4 cameras, that work a treat . The problem I have is when I fitted the 5 th camera slightly away from my house with...
View ArticleHikvision Intercoms do not record on motion
Hi everyone, I recently installed an intercom (KD8002-VM) and would like it to record on motion like any other camera. I have added it to my NVR under camera management and set the recording schedule...
View ArticlemacOS Catalina & Hikvision
has anyone fathomed how to view Hikvision on a Mac with OS updated to the latest Catalina? I have tried iVMS4200 - crashes every thime Sea Monkey - Live view not working Never managed to get safari or...
View Article